Registering a Home Battery in the Netherlands: A Practical Checklist

SigenMate thuisbatterij met uitbreidingsaccu bij een bureau
3 min read

Illustrative SigenMate home-office scene, not a portal screenshot or an approved installation example. Follow the manual for the base, clearances and connection.

A home battery can store electricity, draw power from the grid and supply electricity back. Network operators need to know which systems are connected.

RVO requires battery systems from 0.8 kW to be registered. Household type A systems use energieleveren.nl. This category covers systems from 0.8 kW to less than 1 MW. Source: RVO

Already registered your solar panels? Check the battery too

An existing solar-panel registration does not replace a separate battery record. Previously, solar registrations could include an indication that storage was present. Batteries can now be recorded separately, so check that your battery appears as its own installation. Source: Netbeheer Nederland

Which information should you prepare?

Coteq’s guidance identifies the following information:

  • your electricity connection’s EAN code;
  • inverter manufacturer and model;
  • combined battery power in kW;
  • total storage capacity in kWh;
  • inverter AC output power;
  • the date the installation enters service.

Also keep the installation address, meter number and technical documents available. Follow the current portal questions. This checklist is not a reproduction of its live screen labels. Source: Coteq

Prepare the registration step by step

1. Identify your configuration. List the main unit, expansion batteries, any parallel systems and connected equipment. Use the details of your delivered configuration rather than a similar model.

2. Check the documents. Keep the relevant datasheet and manual. Power in kW and energy capacity in kWh measure different things. PV input, grid output, backup output and pass-through ratings are not interchangeable.

3. Review existing records. Open energieleveren.nl yourself and check what is recorded for your connection. Do not share passwords with an unknown seller.

4. Register in good time. Stedin states that registration is required from the moment an installation enters service and can be completed up to six months beforehand. Do not unnecessarily postpone it until after commissioning. Source: Stedin

5. Check and retain evidence. Ask the installer, manufacturer or network operator to clarify uncertain technical values before submission. Keep the confirmation and submitted details. When expanding or replacing equipment, check whether the record needs updating.

Which SigenMate rating should you enter?

The EU product page lists 800 W nominal grid output for SigenMate 2700 Ultra. Its linked datasheet, however, lists 800/1400 W. Do not assume that one value applies to every version.

Use the current datasheet, product nameplate and supplier confirmation to establish the correct values for the Dutch configuration. Both published power values meet the registration threshold. Expanded or parallel systems need entries that reflect the complete installation.

Registration is not installation approval

Registration gives the network operator technical information. It does not replace electrical-safety checks, manufacturer instructions or connection arrangements. Enexis recommends checking what your existing connection can support and consulting an installer where necessary. Source: Enexis

FAQ

Can my installer register the system? An installer can assist. Check the completed record and keep proof.

Does a plug-in battery also need registration? A plug does not change the registration power threshold. Check your system’s rating.

What if I registered before 7 May 2024? RVO says these home batteries must be entered again on energieleveren.nl.

What if a field is unclear? Ask before submitting. An accurate record matters more than filling a field quickly.

Sources checked on 13 November 2026. This checklist does not replace advice for your specific installation.

Reading next

SigenMate home battery in an illustrative garage setting
Checklist voor subsidie en btw bij een thuisbatterij in Nederland

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.