SigenMate 2700 Ultra with Expansion Battery

Sale price€1.688,00 Regular price€2.598,00
Save €910
3.8

Black Friday Shipping Offer: Save €50 on Shipping – Now Just €39 (Was €89)!

Energy System: SigenMate 2700 Ultra
Expansion Battery: SigenMate BAT 2700

You may also need

Smart Meter

Sigen Power Sensor Smart Meter
Sigen Power Sensor Smart Meter
€169,90€199,90

Cable & Accessories

SigenMate Savings Calculator

Not sure which SigenMate setup is right for you?

See estimated savings for your home

Estimate your home savings

About 1 minute · No sign-up · No full home address required

1 min · No sign-up

Answer a few quick questions to get a recommended setup and see how much you could save.
Answer a few quick questions to see a recommended setup and estimated savings.
  • Right setup for your home
  • Estimated annual savings
  • Payback at a glance
SigenMate Savings Calculator A few quick questions · about 1 minute
1 / 5

Where do you live?

Your country and postcode help us localize your estimate.

Country

The product is available for shipping to the Netherlands only.
Please note: The HomeWizard P1 Meter is compatible with the SigenMate 2700 Ultra but is not included and must be purchased separately.

Total price €1.688,00

Maximize your savings with AI

More savings. Lower Bills. Automatically. 

More savings. Lower Bills. Automatically. 

Cut Electricity Bills by 48% with Sigen AI Mode

Potential annual savings
€1,714 / year¹
Illustrative Payback
3.5 years²
Calculate your savings

*Savings and payback are illustrative estimates. Actual results depend on your configuration, location, electricity tariff and usage. See Data Sources & Disclaimer below.

Plan 48 Hours Ahead.

Plan 48 Hours Ahead.

Anticipate solar generation, household consumption, battery SOC and electricity prices for smarter energy use and greater savings.

Turn Energy Data into Savings.

Sigen AI analyzes your energy usage over time and provides personalized recommendations to help you make better use of your solar energy and reduce electricity costs.

  1. Request an Energy Analysis

    Tell Sigen AI what you want to analyze about your past energy usage.

  2. Get Your Optimization Report

    Sigen AI analyzes your energy data and identifies opportunities to improve solar utilization and save more.

  3. Confirm & Save

    Follow tailored recommendations to optimize your energy usage and make more of your solar power.

Sigen AI energy analysis report and personalized recommendations in the mySigen App
Capture More Sun.

Capture More Sun.

Solar Input
4,000 W
Max. input current per MPPT: 32A
4 MPPTs

0 ms Backup. Expandable to 56.4 kWh.

Keep your home powered, run more appliances and expand your energy storage as your needs grow.

More Power. More Possibilities.

More Power. More Possibilities.

Bypass power for running high-demand household appliances with ease.
3,600 W
Bidirectional power. 800 W plug & play in Germany; up to 1,400 W with installation by a qualified electrician.
1,400 W
Power That Grows with You.

Power That Grows with You.

SigenMate storage capacity.
2.688 kWh
Expandable with additional batteries.
56.4 kWh
WLAN Parallel Connection. More Power. Place Anywhere at Home.

WLAN Parallel Connection. More Power. Place Anywhere at Home.

Connect 2 units for up to 2,800 W or 3 units for up to 3,600 W of grid-tied AC output. With the Wieland socket or fixed wiring installed by a qualified electrician, power even high-wattage household appliances entirely with solar energy.

Up to 3600 W Off-Grid Output Power.

Up to 3600 W Off-Grid Output Power.

Simply connect 3 units in a daisy chain—no extra box required.

Backup Without Interruption. 0 ms Switchover.

Backup Without Interruption. 0 ms Switchover.

For connecting the devices you need.
2 AC Outlets
Backup power for a reliable supply.
1,400 W
Peak power for up to 10 seconds.
1,800 W

Easy to Start. Simple to Manage.

1. Stack

1. Stack

2. Plug In

2. Plug In

3. Set up mySigen App

3. Set up mySigen App

Your Energy. Your Way.

Your Personal AI Energy Assistant.

Ask energy questions, find relevant information and explore personalized energy recommendations.

  1. 01Ask

    Define Your Energy Goals

    Tell Sigen AI your energy goals and how you want your energy managed.

  2. 02Analyze

    Build Your Personalized Strategy

    Sigen AI creates a tailored energy strategy based on your goals and preferences.

  3. 03Confirm

    Confirm & Apply

    Confirm your personalized strategy to put it into action.

Sigen AI energy assistant in the mySigen App
Illustrative interface

Flexible Operating Modes

Choose the energy mode that fits your routine and preferences.

Let AI optimize your energy around the clock. By forecasting solar generation, household consumption, electricity prices and battery SOC. Sigen AI intelligently adjusts your energy strategy to maximize savings.

Sigen AI home energy scenario
Sigen AI settings in the mySigen App

Your Energy & Savings at a Glance.

Get a clear view of your energy usage and savings with the mySigen App.

Your Energy & Savings at a Glance.

Add Storage to your existing system

Seamlessly compatible with solar panels, microinverters and smart meters

Add Storage to your existing system

Connected Beyond the Battery

Connected Beyond the Battery

See Your Green Impact

Lifetime impact

Lifetime Energy Saved
23.3MWh
CO₂ Emissions Avoided
11.07tonnes
Standard Coal Saved
9.32tonnes
Equivalent Trees Planted
15trees

Expert Engineering. Exceptional Standards.

Maximum Safety Protection

9 Layers of Protection for Maximum Safety.

Maximum Safety Protection

Built for Long-Lasting Performance.

Designed for Outdoor Conditions IP66·C5-M; Built-in Battery Heating. -20°C to 55°C
Warranty
10 years
Lifespan
15 years
Charge Cycles
6,000

Your Data. Protected and Under Your Control.

Your Data. Protected and Under Your Control.
Power, in Silence.

Power, in Silence.

Designed to fit naturally into the rhythm of your home.

Quality in Every Detail.

Compact Design

Compact Design

Flexible Placement. No Cable Constraints.

Rear Cable Routing

Rear Cable Routing

A space-saving design that fits seamlessly into your home.

Product Specifications

Download SigenMate Quick Guide
Max. PV Input Power

4000 W

Number of PV MPPT Trackers

4

Max. PV Input Current per MPPT

32 A

On-grid AC Nominal Output Power

800 W

Backup AC Nominal Output Power

1400 W

Plug &Play and DIY Installation

Single unit on grid connection

Plug &Play and DIY Installation

Single unit combined with smart meter / micro inverter

Compare SigenMate setups

Choose storage and solar panels around your home and electricity use.

Before you order
  • Wp is panel capacity, not battery storage or AC output. Check space, orientation and shading.
  • Panels have 1.3 m connection cables. Extra PV extension cables are not included. Check mounting, cables and any sensor separately.
  • Check PV compatibility and local installation requirements. A backup outlet does not automatically provide whole-home backup.
  • Prices follow current variants; discounts and shipping are calculated at checkout.

FAQ

  • 5 stars: 2 (50%)
  • 4 stars: 1 (25%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (25%)
W
Wouter S.
Nice battery, horrible support!

First of all is took very long for the orded battery arrived. Unpacking and install was easy. But then the trouble started, the Sigenmate cannot communicate with energymeter so it sits at idle doing nothing. I tried to solve the issue but i need installer account? to enable the SigenMate to communicate with Homewizzard energy meter. Fist i tried emailing, after initial response asking extra info concerning the energymeter the company does not react anymore for more than a week! Tried multiple times the phone, only long waitingline that results in option to leave message. Left message 2 times, no response!

I think i will put them in the boxes and send them back.

A
Anonymous
Works great, I highly recommend

Works great, I highly recommend it

N
Nico. N.
Good Product! I'm satisfied with my SigenMate

Good Product! I'm satisfied with my SigenMate.

S
Sander -.N.
Needs optimisation, but can get 5 stars if it will fix some open items

Main reason to buy this battery:
- intelligence of the Cloud HEMS of Sigenergy (no tuning by myself). Battery charging needs to be done when the sun is there or when the price is cheap on the grid.
- plug and play, I want to get insights of what a home battery will do for our home when it comes to cost savings. but didn't want an installer for complet battery system that I can't install anywhere in my home.
- get an additional AC output for my dryer, so the battery can be installed in the dryers dedicated group. This way I can increase the discharge capacity to 1400 watt because the battery is on its own group.
- integration with modbus for my Home Assistant, to have insights of costs savings and usage of the battery

OC this is a plug and play battery. So I would say the main thing it works. :) I got it out of the box. Installed 2 additional batteries that came with my order and now I have 8.1 kWh battery capacity. I've chosen to use the P1 meter from Homewizzard. It works perfectly! However from all of the video's I watched I had some issues to discover how the application actually works. I wanted to see the solar energy and basically this is impossible without of the use of additional meters.
This for me is a bit of disappointment. Because this is not 'plug-and-play'. This needs additional HW and an electrician. I was hoping the battery was able to read the modbus-information from my solar edge inverter. So it doesn't need a professional to get the read-outs in the application of Sigenergy. For now I'm using Home Assistant and with the help of the modbus integration on the battery itself I'm creating the dashboards in Home Assistant. I just want the information of the solar panels and the forecast being used in the HEMS of Sigenmate itself.

Also a feature that's not yet there. Dynamic pricing for the dutch market. A feature that's very important! if you want to 'sell' or like me 'buy'/ charge when the electricity is cheap. Working with manual time schedules with dynamic 15 minutes pricing is impossible. if dynamic pricing is already there for other markets, please make it available for the dutch market.

So IMO, intelligence of battery usage can be improved in Sigenenergy application. Insights of usage of external solar panels and additional support for dynamic tariff. I can handle all the insights on my own when it comes to washboarding because probably this will depends on each user what they need.

For other users you can get the limit of your battery to discharge from 800 to 1400 watt. You need to put in a request with the service desk. I'm waiting currently on mine. When this works I think I can save some energy usage on the evening.